Coverage Rates:
The coverage per litre is dependent upon the porosity of the surface. For metal and smooth surfaces 10m² per
litre per coat should be obtained. On porous surfaces coverage will be considerably less.
Method of Application:
By brush or airless spray, apply evenly and ensure no pooling of product. A minimum of two coats of Black
Bituminous Paint is recommended.
Application Instructions:
All surfaces must be free from oil, dirt, dust and loose debris. On metal surfaces all loose rust should be
removed using a wire brush and where advanced signs of corrosion are evident the area must be treated with
a rust inhibitor. A minimum of two coats of Black Bituminous Paint should be applied, the first coat being
allowed to dry before the second is applied.
On porous
Bitumen Paint 5ltr
£20.84 (£25.01 inc. VAT)
Black Bitumen Paint is a general purpose paint for waterproofing and the weather protecting of steelwork and concrete.
A solvent based, general purpose, bituminous black paint for waterproofing and weather protecting of
steelwork, asphalt, wood and concrete. When dry it forms an odourless and taint-free bitumen film.
Cromar’s Black Bituminous Paint forms a waterproof, weatherproof, corrosion resistant protective coating. It is
resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation.
It is suitable for application to a wide variety of surfaces including steel, iron, lead, zinc, aluminium, concrete,
stone and brick but is mainly used for the following:-
Metal protection for any type of exterior metalwork – fire escapes, ladders, gutters etc.
A protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces.
| Weight | 5 kg |
|---|
Only logged in customers who have purchased this product may leave a review.


Reviews
There are no reviews yet.